Lock_NO	Lock signal NO port	12V	+12V power output
Lock_COM	Lock signal commen port	WG_IN 1	WG input positive
Lock_NC	Lock signal NC port	WG_IN 0	WG input negative
Button	Exit	GND	Land
GND	Land	D_Sensor	Door magnetic input port
WG_Out 1	WG output positive	GND	Land
WG_Out 0	WG output negative	Alarm+	External electronic doorbell
GND	Land	Alarm –
Bell+	External electric doorbell	GND	Land
Bell+		12V Power	Power input

It can be connected with Electric bolt lock/electric magnetic lock , as well as exit button, access control power box , to consist one full professional time attendance access control system ! Or use it with professional access control panel to control in and out; it is professional face and fingerprint time attendance access control machine !!!

Please don’t leave the equipment in the light shine. Light has an obvious effect on fingerprint acquisition. (The fingerprint would not be verified)

In summer, try not to use outside. The temperature range of fingerprint machine is 0-40℃. Using in outdoor long term fever, the machine is likely to be slow.

If you must use in outdoor, recommend the use of sunshade and heat radiating device.

 TIME ATTENDANCE BASIC CONCEPT

This part includes the basic concept of the definition and description,

which includes:

• Enroll user
• User Verification
• The safety grade
• Authority

There are two different important functions: enroll user and user Verification

1.1      Enroll User on time attendance machine

The stored template to compare with the current scan finger or face, the fingerprint template is used to confirm the identity of the user is a registered user can achieve attendance in attendance machine specially designated, the attendance process takes about 1 second. The same ID number can register up to ten different fingerprints and 1 face, so that the user can have multiple authentication choice.

Theoretically, you can enroll two different fingers, when user’s one finger gets hurt, user can use another finger to register.

In general, user should enroll  at least two fingers, such as: left index finger and right index finger.

1.2    User verification

When the user push finger on fingerprint scanner, or input a ID number and then push finger, the fingers would be successfully identified. If successful verification, a record would be stored in fingerprint machine.

1.3    The user ID number

The user is assigned a use ID number. The ID number is used to correlate the fingerprint template or password.