EPORDO
Luxury Smart Safe · User Manual
English · based on original factory manual

Luxury Smart Safe — User Manual

Manufacturer: Shenzhen EPORDO Co., Ltd
Power: Battery powered (user supplies / replaces batteries — no external power adapter included)

1. Important Notice

Factory settings

Password: 168

Fingerprint: Empty fingerprint — any fingerprint can open the door

Mode: Normal mode

2. Opening the door for the first time

1. Password activation

  1. Touch the numeric area of the panel with your hand to wake up the panel, and the screen will light up.
  2. Press the # key to start, then enter the password.
  3. When entering the factory password "168", the voice prompts "Please configure password", and the voice prompts "Lock open".
  4. Rotate the handle on the door panel to the right to open the door.

2. Fingerprint activation

  1. Place your finger on the fingerprint window to open the door.
  2. At this time, the voice prompts "Please configure fingerprint", and the door automatically opens. The voice prompts "Lock open".
  3. Rotate the handle on the door panel to the right to open the door.

3. Add fingerprint or password

  1. Short press the "set" button. The fingerprint window and screen light will turn on, and a voice prompt will appear saying "Please enter your fingerprint or password".
  2. At this point, enter the new password (valid digits 4–11), press the # key to end, and the voice prompt will say "Please enter the password again". Enter the new password, press the # key to end. If the password is the same twice, the configuration is successful, and the voice prompts "Password configuration successful".
  3. At this point, place your finger on the fingerprint window and receive a voice prompt saying "Please enter your fingerprint again". Remove your finger and then put it down. Three consecutive inputs indicate successful configuration, with a voice prompt saying "Fingerprint configuration successful".
  4. Press the * or set key to exit the (fingerprint and password configuration) state, and automatically exit after 10 seconds without any operation.

4. Delete fingerprint and password

Press and hold the "set" button for more than 3 seconds, and the voice prompt will indicate "initialization successful", deleting the user's configured password and fingerprint. At this point, the system automatically activates the factory password "168" and opens the door with any fingerprint.

5. Door opening mode setting

Normal mode: Single fingerprint door opening or single password door opening.

Security mode (safe mode): Either of the following conditions must be met:

  1. Dual fingerprint door opening
  2. Dual password door opening
  3. Fingerprint + password door opening
  1. The default door opening mode is normal mode. To set safe mode, the above conditions must be met to enable it, otherwise it cannot be set.
  2. In normal mode, short press the "wifi" button and a voice prompt will appear saying "safe mode has been entered".
  3. In safe mode, short press the "wifi" button and a voice prompt will appear saying "Safe mode canceled".

6. Input error alarm

If the password is entered incorrectly for 3 consecutive times or the fingerprint is entered incorrectly for 5 consecutive times, the system will activate an error alarm, and the alarm horn will sound for 30 seconds. Any valid password or fingerprint can end the alarm.

7. Vibration alarm setting

Touch the number area with your hand to wake up the panel, and the screen light will turn on; then press the * key, and the voice prompt will say "Vibration alarm on". At this time, when the door is closed and the system detects a certain intensity of vibration, the system will activate a vibration alarm and the high-pitched horn will sound an alarm for 30 seconds.

8. Low voltage alarm

This safe is battery powered. There is no external power adapter / power supply included. The user must purchase and install batteries for use, and replace them when prompted.

When the system detects that the power supply voltage is below 4.8V, it triggers a low voltage alarm with a voice prompt of "low voltage, please replace battery". If the battery voltage is below 3.8V, if using fingerprints